EK 880 UF distributor
Manhole, cast cover D400
LW = 800x1400mm, h=935mm
Diving bonnet with PC-MP
Underfloor distributor with swivelling technical compartment
- Clearance dimension: 800 x 1400 mm
- Cast iron manhole cover in cobblestone design,
consists of 4 swivelling covers, load class D400, which can be
interlock each other
- Locking with OTC screws
- Unlocking tool with lifting hook
- Manhole covers with safety device against folding down
- Hot-dip galvanised steel frame
- Manhole body consists of 3 frames with a height of 220 mm each, a base plate and
a head frame for fastening the covers
- Swivelling diving bonnet made of stainless steel and supported by gas springs,
Door made of stainless steel with ventilation grille, IP44,
with swivel lever prepared for profile half cylinder, mounting plate (600 mm x 982.5 mm)
made of polycarbonate mounted on two stainless steel mounting rails in the diving bonnet
- C-rail for commercially available strain relief clamps for cable routing on the floor
of the diving bonnet (strain relief clamps not included in the scope of delivery)
- Mains connection with flexible cables necessary
- C-rails for commercially available strain relief clamps on the base plate
(Strain relief clamps not included in the scope of delivery)
- Plugs for the manhole cover lever holes
- Clearance dimension: 800 x 1400 mm
- Cast iron manhole cover in cobblestone design,
consists of 4 swivelling covers, load class D400, which can be
interlock each other
- Locking with OTC screws
- Unlocking tool with lifting hook
- Manhole covers with safety device against folding down
- Hot-dip galvanised steel frame
- Manhole body consists of 3 frames with a height of 220 mm each, a base plate and
a head frame for fastening the covers
- Swivelling diving bonnet made of stainless steel and supported by gas springs,
Door made of stainless steel with ventilation grille, IP44,
with swivel lever prepared for profile half cylinder, mounting plate (600 mm x 982.5 mm)
made of polycarbonate mounted on two stainless steel mounting rails in the diving bonnet
- C-rail for commercially available strain relief clamps for cable routing on the floor
of the diving bonnet (strain relief clamps not included in the scope of delivery)
- Mains connection with flexible cables necessary
- C-rails for commercially available strain relief clamps on the base plate
(Strain relief clamps not included in the scope of delivery)
- Plugs for the manhole cover lever holes
| Weight | 460 kg / Stk. |
|---|
| WGR | 24 |
|---|
