Stripping tool set 1799004
Intercable AMX/AMS/FBS/IMS/UFS
for max. 630mm² MS cable 30kV
| Weight | 3,78 kg / Stk. |
|---|
| WGR | 17 |
|---|
in red plastic case,
11/12 developed for wind turbines up to 20kV 800mm² to 30kV 630mm²:
- Outer sheath cutter AMX 17300 up to 5mm thickness in 0.1mm steps
Suitable for longitudinal and round cutting of cables with an outer diameter of 16-54 mm
(according to the manufacturer and in our opinion suitable for 630mm²/30kV),
Low-fatigue ratchet feed (rotation diameter max. 300 mm),
Quick-release system, claw for breaking the insulation with safety catch
against unintentional opening.
- Cable sheath cutter AMS 170136
(can opener principle, formerly called AMX) in a case
- Field boundary skimmer FBS for skiving off the vulcanised field boundary layer
up to 1.5mm of MV cables with insulation diameter
10-52mm, aluminium alloy red, clamping system, sliding-coated contact surfaces,
Switch lever for activating/deactivating the axial feed in both directions
directions, stripping process at any desired point, hardened blade for
17° cone shape cut of the semiconductor 0-1.5mm cutting depth, can be limited or blocked,
Rotation diameter max. 200mm, controlled chip guiding device
- Inner sheath cutter IMS II 17231 (universal) for cutting primary insulation up to 15 mm thick
of MV cables (6-45kV) and outer diameter 15-52mm, red aluminium alloy, clamping system, slide-coated
Contact surfaces for stripping end pieces, spiral and circular cut, feed in 5 stages,
Cutting depth 0-15mm, rotation diameter max. 220mm, replaceable blade
- Chamfer cutter UFS for chamfering the primary insulation with a diameter of 15-60 mm,
Aluminium alloy, clamping system, PTFE sliding plates (no need for silicone), replaceable blade
for 2 chamfers of 60° each, rotation diameter max. 200mm
6. accessories such as silicone grease etc.
11/12 developed for wind turbines up to 20kV 800mm² to 30kV 630mm²:
- Outer sheath cutter AMX 17300 up to 5mm thickness in 0.1mm steps
Suitable for longitudinal and round cutting of cables with an outer diameter of 16-54 mm
(according to the manufacturer and in our opinion suitable for 630mm²/30kV),
Low-fatigue ratchet feed (rotation diameter max. 300 mm),
Quick-release system, claw for breaking the insulation with safety catch
against unintentional opening.
- Cable sheath cutter AMS 170136
(can opener principle, formerly called AMX) in a case
- Field boundary skimmer FBS for skiving off the vulcanised field boundary layer
up to 1.5mm of MV cables with insulation diameter
10-52mm, aluminium alloy red, clamping system, sliding-coated contact surfaces,
Switch lever for activating/deactivating the axial feed in both directions
directions, stripping process at any desired point, hardened blade for
17° cone shape cut of the semiconductor 0-1.5mm cutting depth, can be limited or blocked,
Rotation diameter max. 200mm, controlled chip guiding device
- Inner sheath cutter IMS II 17231 (universal) for cutting primary insulation up to 15 mm thick
of MV cables (6-45kV) and outer diameter 15-52mm, red aluminium alloy, clamping system, slide-coated
Contact surfaces for stripping end pieces, spiral and circular cut, feed in 5 stages,
Cutting depth 0-15mm, rotation diameter max. 220mm, replaceable blade
- Chamfer cutter UFS for chamfering the primary insulation with a diameter of 15-60 mm,
Aluminium alloy, clamping system, PTFE sliding plates (no need for silicone), replaceable blade
for 2 chamfers of 60° each, rotation diameter max. 200mm
6. accessories such as silicone grease etc.
